Unless noted all meetings for 2012 will be held at the Pyle Center, which is located in Tempe, 655 E. Southern Ave. All meetings start at 12:00 pm and end at 4:00 pm unless otherwise posted. Whenever possible the 3rd Saturday of the month has been reserved, if the 3rd Saturday was not available an alternate date was selected. Pyle Center location map

Meetings typically start out with club business, followed by the featured demonstration, and then the raffle and prize drawings. Board meetings are open to all club members and are held every other month one hour prior to the regular meeting.

Date	Demonstrator	Topic	President's Challenge Due
January 21, 2012	Jason Clark	Lidded boxes	Collaborations
February 18, 2012	Ken Waller	Natural edge bowls	Lidded Boxes
March 24, 2012 (4th Saturday)	Keith Gotschall - All Day Demo	TBD	N/A
April 21, 2012	Peter Schultheiss	Segmented Turning	Natural Edge
May 26, 2012 (4th Saturday)	Paul Porter	Cutaway hollow form	Segmented
June 16, 2012	Dale Gillaspy	Tool handles	Hollow forms
July 21, 2012	John Lea	Ornamental/Rose Engine	Tool handles
August 18, 2012	Hands On	Various	N/A
September 15, 2012	Amie Avniel	Inside-out	Walnut
October 13, 2012 (2nd Saturday)	J. Paul Fennell	TBD	Inside-out
November 17, 2012	All Day Demo - David Ellsworth	TBD	N/A
December 15, 2012	Holiday party	N/A	N/A

Past all day demonstrations:

Stuart Batty - November 2007

Bonnie Klein - February 2008

John Magill - April 2008

Jimmy Clewes - December 2008

Bill Grumbine - March 2009

Molly Winton - November 2009

Stuart Batty - March 2010

Clay Foster/Jennifer Shirley - January 2011

Chris Pytlik - November 2011